Otf lock up question
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Otf lock up question
Recently my ex and my son got me a cheep otf they found at a street fair over all its ok but most of the time when you close it it bounces back up and comes off track i do not know a lot about otf knives anyone have any ideas whats wrong or a fix for this
- Bill DeShivs
- Yes.
- Posts: 7392
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Otf lock up question
Squirt lighter fluid in the knife and shake it out. Do this a couple of times.
Sounds like it has been over-oiled.
Sounds like it has been over-oiled.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
Re: Otf lock up question
Ill give that a try
Ive actually wondered that then thought na the blade is not covered in oil that cant be a issue
Ive actually wondered that then thought na the blade is not covered in oil that cant be a issue
Re: Otf lock up question
Let us know if it works.
Your friend on the web's most friendly community on knives and blades,
John
Massachusetts Where Everything is Illegal or Taxed
John
Massachusetts Where Everything is Illegal or Taxed
Re: Otf lock up question
For the price of Ronson Lighter Fluid, one can buy a whole quart of VMP naphtha at Home Dept - same stuff, as far as its solvent properties, but WAY CHEAPER when sold in bulk. My last can was around $7 and is only half gone after being used to degunk 30-40 knives on 2 different occasions.Bill DeShivs wrote:Squirt lighter fluid in the knife and shake it out. Do this a couple of times.
Sounds like it has been over-oiled.
NOTE: Naphtha is highly flamable - use with adequate ventilation.
- redeye
- Posts: 1876
- Joined: Sun Feb 24, 2008 3:10 pm
- Location: STARKE FL. REDNECK CAPITAL OF THE WORLD
Re: Otf lock up question
omega wrote:For the price of Ronson Lighter Fluid, one can buy a whole quart of VMP naphtha at Home Dept - same stuff, as far as its solvent properties, but WAY CHEAPER when sold in bulk. My last can was around $7 and is only half gone after being used to degunk 30-40 knives on 2 different occasions.Bill DeShivs wrote:Squirt lighter fluid in the knife and shake it out. Do this a couple of times.
Sounds like it has been over-oiled.
NOTE: Naphtha is highly flamable - use with adequate ventilation.
I think the Ronson has a little oil in it to keep it from evaporating as fast as straight VMP Naptha. But what Omega says is correct on the price per gallon lol kinda like nail polish remover for the ladies,its just acetone but a 7 oz bottle is way more oer oz than a gallon or quart as a professional subtrate preparation and protective and decorative coatings application specialist for over 30 years ( fancy way to say painter lol) I have bought a supertanker full of naptha and acetone.
I am the KING of LATAMA collectors HAHAHAHAHAHAHA {EVIL LAUGH}
Re: Otf lock up question
LOL.... Redeye!
"Location: STARKE FL. REDNECK CAPITAL OF THE WORLD."
As a former Floridian I have to agree ......... if they were to give the state an enema, that's where they would stick the nozzle.
"Location: STARKE FL. REDNECK CAPITAL OF THE WORLD."
As a former Floridian I have to agree ......... if they were to give the state an enema, that's where they would stick the nozzle.
Re: Otf lock up question
i played with it a bit to day and really watched the blade it seems to be coming off track at times before it pulls the last inch or so of the blade in did the lighter fluid thing it seems to be working better give it another treatment later oh and btw there is hardly any blade play i dont know if this could be a factor
- Bill DeShivs
- Yes.
- Posts: 7392
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Otf lock up question
There is no "track." Just 2 levers-one to hold it closed, and one to hold it open.
The blade is either binding before it closes all the way, or bouncing back out after it closes.
The blade is either binding before it closes all the way, or bouncing back out after it closes.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
Re: Otf lock up question
If its one of the Italian-made OTF's (concord, 777, 078-L series, mini, or others), those things were never built solidly enough to be much more than a letter-opener anyway. Good luck on getting it going. That said, they're an awful lot of fun!
Re: Otf lock up question
Omega its chines i know thats alot of the issue but i just cant jump on the net and order one from blade hq
Re: Otf lock up question
Oh... chinese, LOL. Then who knows what you got there. One of the Lightnings, Titan or other microtech-china clones, perhaps. All I know is that trying to fix the double-action models is an exercise in futility. Many have tried, most have failed. I did hear that the new Benchmade OTF clones were a bit more reliable, but I don't yet own one. Something about giving DHgate access to my credit card numbers gives me the willies.
Re: Otf lock up question
DHgate isnt bad they have one of my cc numbers and if your really worried about it get one of them load money as you go greendot cards lol
Re: Otf lock up question
Oops! I meant counterfeits.omega wrote: .........Benchmade OTF clones .......
-
- Posts: 5
- Joined: Wed Jul 19, 2017 3:30 am
Re: Otf lock up question
I had, and fixed this problem with a cheap Chinese cloned 'ultratech' type O.T.F. the problem I has was when I retracted the blade, it would come off track and not 'catch' in the closed position. What I did with mine was to open the handle, remove the blade and re-file the blade itself, where it is notched to accomodate the integrated-in-handle spring operated 'latches' located on either side of the blade, one on top, near the switch, and the other on the bottom-reverse side. In my case, it has worked and not failed since. The original factory work was obviously inadequate and reflected in the low price I paid for it. Your problem may be different, but for my knife, this was the cure.Jaysin wrote:Recently my ex and my son got me a cheep otf they found at a street fair over all its ok but most of the time when you close it it bounces back up and comes off track i do not know a lot about otf knives anyone have any ideas whats wrong or a fix for this