Vintage Italian Switchblade Identification
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
-
- Posts: 43
- Joined: Wed Apr 16, 2008 12:24 pm
Vintage Italian Switchblade Identification
I'd like to get some help better identifying this '70s era stiletto...
The example is 9'' long, with a 4'' blade. As you can see, there is no marking on the tang. The scales are imitation stag horn, with stainless bolsters, and brass liners.
It is in as-new condition, due to it's storage in a display case. It was originally purchased about 1974, and has been unused since that date.
Apparently it was a Beltrame creation, as its 'sister' knife had a tang marking suggesting so.
Please look these images over and let me know your thoughts...
Thanks,
Jim
The example is 9'' long, with a 4'' blade. As you can see, there is no marking on the tang. The scales are imitation stag horn, with stainless bolsters, and brass liners.
It is in as-new condition, due to it's storage in a display case. It was originally purchased about 1974, and has been unused since that date.
Apparently it was a Beltrame creation, as its 'sister' knife had a tang marking suggesting so.
Please look these images over and let me know your thoughts...
Thanks,
Jim
- Attachments
-
- IMG_3190.jpg (26.03 KiB) Viewed 17135 times
-
- IMG_3189.jpg (24.36 KiB) Viewed 17135 times
-
- IMG_3188.jpg (24.11 KiB) Viewed 17135 times
-
- Posts: 43
- Joined: Wed Apr 16, 2008 12:24 pm
Re: Vintage Italian Switchblade Identification
Another image to consider...
- Attachments
-
- IMG_3193.jpg (22.41 KiB) Viewed 17132 times
Re: Vintage Italian Switchblade Identification
Hi Jim,
Without any tang stamp or visible marking in the liners it's very difficult to say who really made this knife. That said, it's appearance looks typical of many makers, but it would be a safe bet to say it was a Beltrame or it could be a Campolin. Let's see what the other members have to say.
John
Without any tang stamp or visible marking in the liners it's very difficult to say who really made this knife. That said, it's appearance looks typical of many makers, but it would be a safe bet to say it was a Beltrame or it could be a Campolin. Let's see what the other members have to say.
John
Your friend on the web's most friendly community on knives and blades,
John
Massachusetts Where Everything is Illegal or Taxed
John
Massachusetts Where Everything is Illegal or Taxed
- FreeTheArmy
- Posts: 1256
- Joined: Tue Jun 22, 2010 1:56 pm
- Location: Kentucky
Re: Vintage Italian Switchblade Identification
Judging by the pics alone, I'd say it is a late 80's/early 90's construction. If you could take a pic of the backspring, and a closeup of the inner spring near the rear/bottom bolsters, you might get a more accurate reply. But I doubt this knife is from the 70's.
It might even be from the late 90's/early 00's.
Imitation stag is not very common, nor does it date the piece very well.
Many of your basic "classic" style stilettos are tough to date and title the maker, becuase of the "universal" qualities and attributes. But the commonality of the 80's, 90's, and 00's stilettos are seen here.
The 70's started the trend with this "commonality", so I reckon it is quite possible the piece came out of that decade.
I hope you find a better answer than mine
Looks like a fun piece, for sure
Free
It might even be from the late 90's/early 00's.
Imitation stag is not very common, nor does it date the piece very well.
Many of your basic "classic" style stilettos are tough to date and title the maker, becuase of the "universal" qualities and attributes. But the commonality of the 80's, 90's, and 00's stilettos are seen here.
The 70's started the trend with this "commonality", so I reckon it is quite possible the piece came out of that decade.
I hope you find a better answer than mine
Looks like a fun piece, for sure
Free
"Everyone is your neighbor."
-
- Posts: 43
- Joined: Wed Apr 16, 2008 12:24 pm
Re: Vintage Italian Switchblade Identification
So, there isn't any detail that may suggest what decade the knife was produced?
In this case, it may be a situation where I'd have to take the individual's word on the age and type?
I hope I can gather more solid evidence on this as I was wanting in particular, a vintage knife.
Jim
In this case, it may be a situation where I'd have to take the individual's word on the age and type?
I hope I can gather more solid evidence on this as I was wanting in particular, a vintage knife.
Jim
Re: Vintage Italian Switchblade Identification
Jim,
Regarding manufacture, do a search here for "cottage industry" You may find the information useful.
Jim
Regarding manufacture, do a search here for "cottage industry" You may find the information useful.
Jim
-
- Posts: 43
- Joined: Wed Apr 16, 2008 12:24 pm
Re: Vintage Italian Switchblade Identification
Free,FreeTheArmy wrote:Judging by the pics alone, I'd say it is a late 80's/early 90's construction. If you could take a pic of the backspring, and a closeup of the inner spring near the rear/bottom bolsters, you might get a more accurate reply. But I doubt this knife is from the 70's.
It might even be from the late 90's/early 00's.
Imitation stag is not very common, nor does it date the piece very well.
Many of your basic "classic" style stilettos are tough to date and title the maker, becuase of the "universal" qualities and attributes. But the commonality of the 80's, 90's, and 00's stilettos are seen here.
The 70's started the trend with this "commonality", so I reckon it is quite possible the piece came out of that decade.
I hope you find a better answer than mine
Looks like a fun piece, for sure
Free
I wasn't able to get a clear, detailed image of that interior area you mentioned, but when I inspected it under a bright light, with a loupe, the spring and bottom bolster appear to be a single piece - no seam or joint there in that corner.
I looked at another knife of mine (an 8'' AB with tang marking, purchased in the early 2000s) and it does suggest that there is a seam, or maybe a line from being machined, but certainly not as smooth a transition as the faux-stag stiletto.
Does that give any more indications?
Jim
Re: Vintage Italian Switchblade Identification
Many of the basic stilettos with stainless bolsters,bayonet blades etc have remained almost unchanged for about 4 decades,pinpointing a date is almost impossible.
There may be a few out there that if examining the knife first hand could make an educated guess as to the age.
The lack of a companies logo/tang stamp has always made it difficult but again this is the Northern Italy "Cottage Industries" way of doing things.
It's a great system but makes it very difficult to identify knives.
There may be a few out there that if examining the knife first hand could make an educated guess as to the age.
The lack of a companies logo/tang stamp has always made it difficult but again this is the Northern Italy "Cottage Industries" way of doing things.
It's a great system but makes it very difficult to identify knives.
Re: Vintage Italian Switchblade Identification
Would also think it is from the late 90's and possibly from the cottage industry as Jim and Viking suspect. Have a couple of these and for sure not vintage.
~RAZOR~
Rather be judged by 12 than carried by 6
Rather be judged by 12 than carried by 6
-
- Posts: 43
- Joined: Wed Apr 16, 2008 12:24 pm
Re: Vintage Italian Switchblade Identification
Razor_54 wrote:Would also think it is from the late 90's and possibly from the cottage industry as Jim and Viking suspect. Have a couple of these and for sure not vintage.
Thanks guys - I appreciate your comments.
It's too bad it doesn't seem to be a 'vintage' example. That's what I was told, and I guess I was duped.
Other than that disappointment, it appears to be a nice stiletto, certainly in pristine condition, especially from something made in the '90s.
So, are the imitation stag horn scales relatively rare, or simply produced for a short period, and at the time just weren't very popular?
Thanks again,
Jim
Re: Vintage Italian Switchblade Identification
We don't want you to feel bad about it. Whether the knife was made in the early 50's or last night, it's still a fine example of an Italian stiletto and collectable.Jim Cissell wrote:Razor_54 wrote:Would also think it is from the late 90's and possibly from the cottage industry as Jim and Viking suspect. Have a couple of these and for sure not vintage.
Thanks guys - I appreciate your comments.
It's too bad it doesn't seem to be a 'vintage' example. That's what I was told, and I guess I was duped.
Other than that disappointment, it appears to be a nice stiletto, certainly in pristine condition, especially from something made in the '90s.
So, are the imitation stag horn scales relatively rare, or simply produced for a short period, and at the time just weren't very popular?
Thanks again,
Jim
If it was made in the cottage industry, it is a 100% better then the cheap clones out there.
~RAZOR~
Rather be judged by 12 than carried by 6
Rather be judged by 12 than carried by 6
Re: Vintage Italian Switchblade Identification
Thing is even if it is from the 70's and called "vintage" it really doesn't make it any more valuable. It would just kind of be cool to know it was a 70's model but as Razor said it's a very nice knife and you like it so hopefully you don't feel like you've been had.Jim Cissell wrote:It's too bad it doesn't seem to be a 'vintage' example. That's what I was told, and I guess I was duped.
None of us are positive about it's age and one thing that comes to my mind is that not a lot of people(collectors) go out of their way to buy an imitation stag knife.
Many figure if I am going to order a knife from Italy I want horn,stag or wood. I think the imitation stag makes it kind of a rare piece and an excellent collectible.
-
- Posts: 43
- Joined: Wed Apr 16, 2008 12:24 pm
Re: Vintage Italian Switchblade Identification
Thanks guys. You've all made some excellent points, and I appreciate that.
I feel much better about the knife after hearing everyone's comments, and agree it doesn't HAVE to be vintage to be enjoyed.
And actually, the fake stag is kinda neat!
Take care, all, and thanks again.
Jim
I feel much better about the knife after hearing everyone's comments, and agree it doesn't HAVE to be vintage to be enjoyed.
And actually, the fake stag is kinda neat!
Take care, all, and thanks again.
Jim
- Panzerfaust
- Posts: 1348
- Joined: Mon Nov 08, 2010 10:23 pm
Re: Vintage Italian Switchblade Identification
There is no way that knife could be from the 70s because thay blade style, called a bayonet blade (although it does not look like a bayonet) did not begin to reappear until the very late 80s or early 90s.
- FreeTheArmy
- Posts: 1256
- Joined: Tue Jun 22, 2010 1:56 pm
- Location: Kentucky
Re: Vintage Italian Switchblade Identification
yup yupPanzerfaust wrote:There is no way that knife could be from the 70s because thay blade style, called a bayonet blade (although it does not look like a bayonet) did not begin to reappear until the very late 80s or early 90s.
But Jim, its a fine knife.
As long as you didn't pay out the arse for it, no one ought to lose any teeth over the matter.
The faux stag is rare but only raises value if someone is trying to find a stiletto of each scaling.
Try not to think of "future value", and go only for what really turns your knobs
Glad you're happy with it
"Everyone is your neighbor."