hammer brand
Moderators: Bill DeShivs, The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
hammer brand
how can i remove some of the scatches and dark patches from my hammer brand blade. thanks for all the help guys with my other questions im still new at this game . but i am learning alot from the experts here.
-
Bill DeShivs
- Yes.
- Posts: 7367
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Try 0000 steel wool and WD 40 first. If this doesn't clean it, then...
A popsicle stick with 600 grit sandpaper tightly wrapped around it, for a start. Sand lengthwise. Then use 1000 grit. Then use 1500 grit, then 2000. Always use the stick, and keep changing the paper to expose fresh grit. If the paper "loads",it will put deep scratches in the blade. Finish with Simichrome or other metal polish.
Bill
A popsicle stick with 600 grit sandpaper tightly wrapped around it, for a start. Sand lengthwise. Then use 1000 grit. Then use 1500 grit, then 2000. Always use the stick, and keep changing the paper to expose fresh grit. If the paper "loads",it will put deep scratches in the blade. Finish with Simichrome or other metal polish.
Bill