Question for Bill...
Moderators: Bill DeShivs, The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
- eastcoastsniper
- Posts: 936
- Joined: Mon Aug 25, 2008 7:34 pm
- Location: You can run, but, you'll just die tired
Question for Bill...
Hi Bill Deshivs,
Will the kits for the new 9" leverletto be available any time soon?
Can you offer them with kriss blades?? (pretty please!)
Will the kits for the new 9" leverletto be available any time soon?
Can you offer them with kriss blades?? (pretty please!)
- Bill DeShivs
- Yes.
- Posts: 7362
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Question for Bill...
You'll have to ask Angelo!
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
- eastcoastsniper
- Posts: 936
- Joined: Mon Aug 25, 2008 7:34 pm
- Location: You can run, but, you'll just die tired
Re: Question for Bill...
I asked Angelo, And just like you said...no response!
I spend a LOT of money on knives and if a supplier/manufacturer can't take the time to answer a simple question from one of his customers, well, this customer might have to look for someplace else to spend his money.
I'm sure I'm not alone on that statement either.
I spend a LOT of money on knives and if a supplier/manufacturer can't take the time to answer a simple question from one of his customers, well, this customer might have to look for someplace else to spend his money.
I'm sure I'm not alone on that statement either.
- Bill DeShivs
- Yes.
- Posts: 7362
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Question for Bill...
Sorry. Angelo usually only deals with wholesalers.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
Re: Question for Bill...
HAAAA they should be release soon, no kriss blades, hopefully we will or i will see them in April....HDC
stay thirsty my friend
Re: Question for Bill...
To eastcoastsniper:
Why don't you ask Bill make some for you by swapping the blades? Theres always that option if nobody carries it.
Jeff
Why don't you ask Bill make some for you by swapping the blades? Theres always that option if nobody carries it.
Jeff
Leverlock switchblades
- eastcoastsniper
- Posts: 936
- Joined: Mon Aug 25, 2008 7:34 pm
- Location: You can run, but, you'll just die tired
Re: Question for Bill...
Bill,Jeff_75 wrote:To eastcoastsniper:
Why don't you ask Bill make some for you by swapping the blades? Theres always that option if nobody carries it.
Jeff
I'll buy a few kriss blades from you if you have them for the 7 3/4 inch leverletto.
- Bill DeShivs
- Yes.
- Posts: 7362
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Question for Bill...
I don't have any Leverletto parts. I designed the knives, AKC makes them, and people like HDC sell them.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
-
- Posts: 1051
- Joined: Wed Aug 13, 2003 7:39 pm
- Location: Cowchip Capital of the World
Re: Question for Bill...
Bill,I'm still hoping you"ll design a pocket knife size mini LeverLetto (with carbon steel blade)
Re: Question for Bill...
I just checked HDC knives online and the front page is full of leverlettos with kriss blades. Are those what your looking for sniper?
Leverlock switchblades
- eastcoastsniper
- Posts: 936
- Joined: Mon Aug 25, 2008 7:34 pm
- Location: You can run, but, you'll just die tired
Re: Question for Bill...
He doesn't update his website!, I bought the last one months ago.Jeff_75 wrote:I just checked HDC knives online and the front page is full of leverlettos with kriss blades. Are those what your looking for sniper?
I think he just keeps everything on the website, then, when he gets it back in stock, he doesn't have to add it to the site.
Kinda like me and the clocks in my trucks, I never change them when we turn back the clocks, but the next time the time changes, hey...It's already there.
There is only one seller that has any kits left. His price,pp fees,exchange rate fees and high shipping make it not worth the price.
Thanks for checking though..I really appreciate it.
Re: Question for Bill...
eastcoastsniper wrote:He doesn't update his website!, I bought the last one months ago.Jeff_75 wrote:I just checked HDC knives online and the front page is full of leverlettos with kriss blades. Are those what your looking for sniper?
I think he just keeps everything on the website, then, when he gets it back in stock, he doesn't have to add it to the site.
Kinda like me and the clocks in my trucks, I never change them when we turn back the clocks, but the next time the time changes, hey...It's already there.
There is only one seller that has any kits left. His price,pp fees,exchange rate fees and high shipping make it not worth the price.
Thanks for checking though..I really appreciate it.
Yep your right i don,t update my site haaaaa and i don,t change the clock in my truck either?? i thought i was the only one The kits will get here, some time people only have one speed and its not fast
stay thirsty my friend
- eastcoastsniper
- Posts: 936
- Joined: Mon Aug 25, 2008 7:34 pm
- Location: You can run, but, you'll just die tired
Re: Question for Bill...
It's too cold up there to do anything fast!
Re: Question for Bill...
Not to stray the subject but I noticed the clock in my truck today was finally correct too. That was before you guys even mentioned it.
Leverlock switchblades
- eastcoastsniper
- Posts: 936
- Joined: Mon Aug 25, 2008 7:34 pm
- Location: You can run, but, you'll just die tired
Re: Question for Bill...
Hahaha - Jeff and HDC, This motivational poster fits us.....Jeff_75 wrote:Not to stray the subject but I noticed the clock in my truck today was finally correct too. That was before you guys even mentioned it.
.
.