Blade hand reground to it's original full convex blade shape on a Foss 7205 black/green silicon carbide stone used with oil, then refined on 400 grit and 1000 grit SiC wet & dry paper used with oil on glass, and the tiny burr stropped off on hard cardboard with 1.0 micron diamond paste.
The new apex measures between 20 and 22,5 degrees inclusive.
Very hard (guesstimate 64-65 HRC) and also very wear resistant steel.
Handle reassembled, now with all washers glued and pommel repolished, then treated to a few coats of warm Granger's wax.
Sheath waxed and hand restitched.
![Image](https://i.ibb.co/GFZSNC2/GE-DIGITAL-CAMERA.jpg)