damascus blades
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
damascus blades
i was enjoying mr teddys pictures today while the gilrs are out back disassembling an old copy machine, when i saw the discussion on damascus blades i've been on skm's website several times and see them listed as an option.
this is what i think i know damascus blades were made by folding the metal over and over while being forged. i assume the new ones are made a different manor now? is the steel better quality than the standard 440 stainless it seems to cost a little more.
missaman
p.s. teddy, i changed my avatar just for you
this is what i think i know damascus blades were made by folding the metal over and over while being forged. i assume the new ones are made a different manor now? is the steel better quality than the standard 440 stainless it seems to cost a little more.
missaman
p.s. teddy, i changed my avatar just for you
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
There are a couple ways of doing it; the old fold and forge, and the new powdered metal Swedish way, which may [ironically] be closer to the original Wootz steel from India that was exported to the Damascus area.
[Original Damascus blades from the Crusade period do not show the layered/welded pattern but do show a similar appearing pattern perhaps due to inclusions in the steel. Some [most/all?] of the Italian Damascus blades are Swedish steel [probably powdered metal]. Some modern forgers now prefer calling their blades pattern welded instead of Damascus.
[Original Damascus blades from the Crusade period do not show the layered/welded pattern but do show a similar appearing pattern perhaps due to inclusions in the steel. Some [most/all?] of the Italian Damascus blades are Swedish steel [probably powdered metal]. Some modern forgers now prefer calling their blades pattern welded instead of Damascus.
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
The Swedes have not been very forthcoming on the actual process. I'll take a guess that two different types of powdered steel are mixed in a manner that keeps them seperated or causes them to seperate enough to cause the layered effect. [During a crucible melt?] Whether any hammering or forging [perhaps rolling?] is done I don't know. Since patterns vary [on observed knives] there appears to be some random variable somewhere. Is it "true" Damascus? Probably not. Is "traditional Damascus" [pattern welded] "true Damascus?" Doubtful. Can we enjoy either or both? Absolutely! For more on Wootz Damascus do a search or see http://www.tms.org/pubs/journals/JOM/98 ... -9809.html
- Pushbutton
- King of Switchbladeland
- Posts: 3670
- Joined: Thu May 23, 2002 7:07 pm
- Location: Town Dump
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
I saw an article in one of the knife annuals a few years ago abouta maker in the mid-west [in the 30s I think] that cold forged mostly kitchen knives from car fenders. Despite the fact this is considered bad steel, and cold forging is also considered a poor way to do it, this guys knife outcut [in hemp rope] a very well made custom knife, many times over. It's one article I should have saved because it was interesting but no explanations were given just the results.
- catavenger
- Posts: 44
- Joined: Fri Jul 18, 2003 8:00 pm
- Location: Da Moon
- Contact:
Damascus
I have heard somewhere they tempered the blade by running it into a human being.
- Pushbutton
- King of Switchbladeland
- Posts: 3670
- Joined: Thu May 23, 2002 7:07 pm
- Location: Town Dump
That would be a great easy inexpensive way to heat treat if only our insides were hotter plus you not only get a perfectly heat treated blade you also get green stamps for ridding the world of one more predator. Boy with enough green stamp boolkets I could get that jr camper set I always wanted Damn.
PB
PB
- catavenger
- Posts: 44
- Joined: Fri Jul 18, 2003 8:00 pm
- Location: Da Moon
- Contact:
Quenching
maybe thats how they quenched it instead of using water? I will keep looking on the net eventually I shall find it the whole world is on the net!