Frank Beltrame Stilettos - Replacement Parts?

This forum is for general discussion regarding anything that cuts.

Moderator: The Motley Crew

Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
phreak
Posts: 4
Joined: Sun Jul 22, 2018 1:57 am

Frank Beltrame Stilettos - Replacement Parts?

Postby phreak » Sun Jul 22, 2018 2:09 am

Does anyone know of a place that sells replacement parts for Frank Beltrame stilettos? What I'm actually looking for is a different blade (as I just finished destroying mine with some horrible dremel work). Would just buy another one, but I'd like to just replace the blade for sentimental reasons.

User avatar
john
Posts: 3069
Joined: Tue Dec 01, 2009 11:40 am
Location: New England, MA USA

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby john » Sun Jul 22, 2018 2:21 am

What size and style of blade do you need? Parts come from other knives. It’s too bad that parts aren’t easily available from the manufacturers in Italy. Someone may have a blade, but it may not fit. When it comes to pick locks or swivel bolsters the locking pin may not line up with the locking tab.
More info please.
Good luck,
John
Your friend on the web's most friendly community on knives and blades,
John

Massachusetts Where Everything is Illegal or Taxed

phreak
Posts: 4
Joined: Sun Jul 22, 2018 1:57 am

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby phreak » Sun Jul 22, 2018 2:46 am

john wrote:What size and style of blade do you need? Parts come from other knives. It’s too bad that parts aren’t easily available from the manufacturers in Italy. Someone may have a blade, but it may not fit. When it comes to pick locks or swivel bolsters the locking pin may not line up with the locking tab.
More info please.
Good luck,
John


The knife is an 11" with 5" blade. This is the exact knife minus the handle color:
https://www.bladehq.com/item--Frank-B-1 ... ayo--31667

Current blade is bayonet. I wouldn't mind swapping it to a kris blade, however I would take whatever I could get as far as blade style.

User avatar
JulesVane
Posts: 863
Joined: Sat Apr 01, 2017 12:34 am

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby JulesVane » Sun Jul 22, 2018 4:14 am

This is the wrong size, but maybe you can contact this site to see if they have it in 28cm. As I've never personally seen single blades for sale anywhere else. Good luck! http://www.pvk.vegas/Frank-Beltrame-23C ... -blade.htm
Image

"Start every day off with a smile and get it over with"...W.C. Fields

phreak
Posts: 4
Joined: Sun Jul 22, 2018 1:57 am

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby phreak » Sun Jul 22, 2018 6:04 pm

JulesVane wrote:This is the wrong size, but maybe you can contact this site to see if they have it in 28cm. As I've never personally seen single blades for sale anywhere else. Good luck! http://www.pvk.vegas/Frank-Beltrame-23C ... -blade.htm


Greatly appreciated! I have done just that. Awaiting their reply.

METALGOD
Posts: 1030
Joined: Fri Mar 05, 2004 2:55 pm

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby METALGOD » Sun Jul 22, 2018 11:35 pm

hi simply buying a blade will most likely not work as each blade and backspring are fitted to each other so just swaping a blade out will not work correctly.

if you bought 10 Frank beltrame stilettos took them apart tried swaping blades around they will not work correctly. each blade and backspring are fitted to each other at factory no 2 are same they might be close very close but not same.

phreak
Posts: 4
Joined: Sun Jul 22, 2018 1:57 am

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby phreak » Mon Jul 23, 2018 11:44 pm

METALGOD wrote:hi simply buying a blade will most likely not work as each blade and backspring are fitted to each other so just swaping a blade out will not work correctly.

if you bought 10 Frank beltrame stilettos took them apart tried swaping blades around they will not work correctly. each blade and backspring are fitted to each other at factory no 2 are same they might be close very close but not same.


That makes sense.

I also received a response from the site given in the link above and they stated the blades they have they bought a long time ago and that's all they have. Said they were hard to come by. Looks like I'm sol. Oh well, was worth a shot. That'll teach me not to take a dremel to a custom Italian switchblade!

User avatar
john
Posts: 3069
Joined: Tue Dec 01, 2009 11:40 am
Location: New England, MA USA

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby john » Tue Jul 24, 2018 12:53 am

Don’t give up. If you do find s blade, it or your knife may need a minor adjustment for it to work properly. Also. A blade can be custom made by several of the forum members.
Your friend on the web's most friendly community on knives and blades,
John

Massachusetts Where Everything is Illegal or Taxed

User avatar
whippersnapper
Posts: 6348
Joined: Sat Oct 16, 2004 12:39 pm
Location: Michigan

Re: Frank Beltrame Stilettos - Replacement Parts?

Postby whippersnapper » Tue Jul 24, 2018 2:26 am

I have a couple blades for 9 inch Franks but no 11"...sorry


Return to “General discussion on blades”

Who is online

Users browsing this forum: No registered users and 3 guests