An ambitious folder
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
An ambitious folder
I have projected a folder.
An ambitious folder. It have some technological solutions.
Frame lock with Rotoblock safety block;
One piece titanium 6Al4V handle, tool steel blade for better cutting ability.
Three protos are made from Lionsteel.
Do you think that this knife can be produced?
An ambitious folder. It have some technological solutions.
Frame lock with Rotoblock safety block;
One piece titanium 6Al4V handle, tool steel blade for better cutting ability.
Three protos are made from Lionsteel.
Do you think that this knife can be produced?
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
Re: An ambitious folder
The answer to that question is; of coursemolletta wrote:I have projected a folder.
An ambitious folder. It have some technological solutions.
Frame lock with Rotoblock safety block;
One piece titanium 6Al4V handle, tool steel blade for better cutting ability.
Three protos are made from Lionsteel.
Do you think that this knife can be produced?
The answer to the REAL qustion [WILL it be produced]
Is FAR LESS certain
Re: An ambitious folder
Why not?Vagrant wrote: .....
The answer to the REAL qustion [WILL it be produced]
....
- arthas
- Cutlery Town Warrior
- Posts: 1580
- Joined: Thu May 23, 2002 6:11 pm
- Location: The downtown of the cutlery town
- Contact:
Re: An ambitious folder
Hi!
Seems quite interesting... is there a price figure for this?
M.
Seems quite interesting... is there a price figure for this?
M.
Re: An ambitious folder
Nice knife. How are you doing your machining?
Tom
Tom
Is it...Tomorrow....Or just the end of time?
Re: An ambitious folder
Technical characteristics:
Blade length 94 mm
Blade Thickness: 4.5 mm
Overall : 211 mm
Weight: 208 gr
Blade Steel : Sleipner, Uddeholm Sweden
Sleipner Steel: C:0.9 Si:0.9 Mn:0.5 Cr:7.8 Mo:2.5 V:0.5
Hardness : 59-61 HRC
Monolithic grip Ti6AL4V
Fame Lock
Rotolock Sistem: prevent the over extension of the lockbar and stop it when the blade is in open position.
Replacable lockbar stainless steel tip
Stainless steel reversible Clip
Screw with breaking glass
Guarantee: Limited Lifetime Warranty: LionSteel Company warrants to the original owner that the knife will be free from defects in material and workmanship.
Version available: Grey (sand Blasted), Violet or Bronze.
Packaging: Wood box with a special screwdrivers for clip and blade pivot screw
Design: Molletta
Production : LionSteel
We decided to apply a discount to all those who will support to start with this new project.
We need to reach a minimum number in order to start the production. For this reason we decided to apply a discount, valid until 2010.01.20 for all those who process the reservation in order, and pay it the same by the date. After that date will be applied to the commercial price list.
Price 295.00 Euro
Price for orders and payments within 20 January 2010 195.00 Euro
List for the pre-order: http://www.lionsteel.it/fast/k/en/eur/i ... ?idforum=3
Blade length 94 mm
Blade Thickness: 4.5 mm
Overall : 211 mm
Weight: 208 gr
Blade Steel : Sleipner, Uddeholm Sweden
Sleipner Steel: C:0.9 Si:0.9 Mn:0.5 Cr:7.8 Mo:2.5 V:0.5
Hardness : 59-61 HRC
Monolithic grip Ti6AL4V
Fame Lock
Rotolock Sistem: prevent the over extension of the lockbar and stop it when the blade is in open position.
Replacable lockbar stainless steel tip
Stainless steel reversible Clip
Screw with breaking glass
Guarantee: Limited Lifetime Warranty: LionSteel Company warrants to the original owner that the knife will be free from defects in material and workmanship.
Version available: Grey (sand Blasted), Violet or Bronze.
Packaging: Wood box with a special screwdrivers for clip and blade pivot screw
Design: Molletta
Production : LionSteel
We decided to apply a discount to all those who will support to start with this new project.
We need to reach a minimum number in order to start the production. For this reason we decided to apply a discount, valid until 2010.01.20 for all those who process the reservation in order, and pay it the same by the date. After that date will be applied to the commercial price list.
Price 295.00 Euro
Price for orders and payments within 20 January 2010 195.00 Euro
List for the pre-order: http://www.lionsteel.it/fast/k/en/eur/i ... ?idforum=3
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
Re: An ambitious folder
I own several Lion Steel knives and they are EXCELLENT
The steel specs. on this one are a "tool steel" and not stainless
A GREAT choice
It appears to be an AWESOME knife
But, in the present economy 295 E is probably too expensive for most people
The steel specs. on this one are a "tool steel" and not stainless
A GREAT choice
It appears to be an AWESOME knife
But, in the present economy 295 E is probably too expensive for most people
- arthas
- Cutlery Town Warrior
- Posts: 1580
- Joined: Thu May 23, 2002 6:11 pm
- Location: The downtown of the cutlery town
- Contact:
Re: An ambitious folder
Hi!
M.
Well, the 195 if ordering before Jan 20 don't seem that bad for such a quality knife... IMHO.Vagrant wrote:But, in the present economy 295 E is probably too expensive for most people
M.
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
Re: An ambitious folder
VERY truearthas wrote:Hi!
Well, the 195 if ordering before Jan 20 don't seem that bad for such a quality knife... IMHO.Vagrant wrote:But, in the present economy 295 E is probably too expensive for most people
M.
Forgive an old dyslexic guy for not seeing the 195
BUT, even that is still a LOT of money in these tough economic times
Let's see what other members think
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
Re: An ambitious folder
You could tell better than I could But, my guess would be a CNC machining centertr4252 wrote:Nice knife. How are you doing your machining?
Tom
But a blade made of "real steel" [instead of stainless] is what I like
The Violet handle looks both elegant and "businesslike"
-
- Posts: 952
- Joined: Tue Nov 18, 2008 11:55 am
Re: An ambitious folder
Wow that looks like an awesome knife. Though i am hesitant to spend that much on a blade without ever owning or seeing another knife the company has produced. But if vagrant says they are of high standards then i can go with that
I will be interested in getting this knife. Im gonna start saving my pennies until the 20th and keep an eye out for how much interest there is
I will be interested in getting this knife. Im gonna start saving my pennies until the 20th and keep an eye out for how much interest there is
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
Re: An ambitious folder
I imported and sold about a dozen +/- of the "Outdoor 7" [sold by AB/SKM, made by Lion Steel]. I sold several to other members of this forum. Hopefully some of them will "chime in" with their opinion of those
MY opinion was they were "almost German quality" at nowhere near German price
And this looks like a much more sophisticated/hi-tec knife
MY opinion was they were "almost German quality" at nowhere near German price
And this looks like a much more sophisticated/hi-tec knife
Re: An ambitious folder
Here are the first pictures of the definitive knife.
It will be shipped inside a box made of wood.
There will be a tool provided with it, which gives you the possibility to attach of remove to clip. The clip is reversible, so you can choose whether you mount it on the front or the back of the knife.
The tool will also be able to change the smoothness of opening/closing the blade by adjusting the pivot screw.
And it is also usefull when you want to clean the knife thoroughly.
It will be shipped inside a box made of wood.
There will be a tool provided with it, which gives you the possibility to attach of remove to clip. The clip is reversible, so you can choose whether you mount it on the front or the back of the knife.
The tool will also be able to change the smoothness of opening/closing the blade by adjusting the pivot screw.
And it is also usefull when you want to clean the knife thoroughly.
- thatoneguy
- Posts: 303
- Joined: Thu Jan 08, 2009 2:04 am
Re: An ambitious folder
I need more money!
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
Re: An ambitious folder
So do Ithatoneguy wrote:I need more money!