Oddest place you've found a knife
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
-
- Posts: 2
- Joined: Sat Jul 02, 2022 3:00 pm
Oddest place you've found a knife
Working outside most my life you run into some interesting and just out right weird things.
Last week I had the task of removing these big metal panels off an awning in the side of a warehouse. I was about 25' to 30' up. This is in Nevada btw, where the wind blows more sand around than an intern at a DNC convention.
There's about 3 or 4 inches of sand and as I'm moving along the edge I see this metal something sticking halfway up. Being the eyes always on the ground looking for a cool rock guy and my curiosity piqued I pulled it out to reveal a metal handle with some mechanisms inside.
As I turned it over i saw the blade and immediately thought I had found a switchblade. As I looked at it more I saw that there was no side opening but just a gap on the top of the handle. Then I realized HOLY SH**$ I just found a spy knife! Because up until 2 days ago I didn't know the official OTF name. So then I started wondering where this knife came from and why was it 30 feet up on a 10 by 20 awning, buried under sand and grit like it has been there for years... So.. I took the murder weapon home, cleaned it up real nice, put a fresh edge on the blade and started the researching. Which led me here. Oh and one last thing, the body of the handle was whole until I tapped it to remove some stuck dirt haha. It broke exactly at the same point on both sides! I thought you all might enjoy that true story that happens just last Wednesday in Sparks Nevada.
P.s. and as far as I can tell it's a super automatic? And missing at least 2 of those tension brackets. I would love to restore her! I definitely have the brain the tools and the want! Let me know what I should do! Thanks guys and gals.
Last week I had the task of removing these big metal panels off an awning in the side of a warehouse. I was about 25' to 30' up. This is in Nevada btw, where the wind blows more sand around than an intern at a DNC convention.
There's about 3 or 4 inches of sand and as I'm moving along the edge I see this metal something sticking halfway up. Being the eyes always on the ground looking for a cool rock guy and my curiosity piqued I pulled it out to reveal a metal handle with some mechanisms inside.
As I turned it over i saw the blade and immediately thought I had found a switchblade. As I looked at it more I saw that there was no side opening but just a gap on the top of the handle. Then I realized HOLY SH**$ I just found a spy knife! Because up until 2 days ago I didn't know the official OTF name. So then I started wondering where this knife came from and why was it 30 feet up on a 10 by 20 awning, buried under sand and grit like it has been there for years... So.. I took the murder weapon home, cleaned it up real nice, put a fresh edge on the blade and started the researching. Which led me here. Oh and one last thing, the body of the handle was whole until I tapped it to remove some stuck dirt haha. It broke exactly at the same point on both sides! I thought you all might enjoy that true story that happens just last Wednesday in Sparks Nevada.
P.s. and as far as I can tell it's a super automatic? And missing at least 2 of those tension brackets. I would love to restore her! I definitely have the brain the tools and the want! Let me know what I should do! Thanks guys and gals.
- Attachments
-
- Compress_20220702_205535_5057.jpg (78.2 KiB) Viewed 1855 times
Last edited by Battleborn27 on Sun Jul 03, 2022 3:56 am, edited 1 time in total.
- Bill DeShivs
- Yes.
- Posts: 7391
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Oddest place you've found a knife
The handle is die cast zinc and it's not repairable.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
-
- Posts: 4048
- Joined: Sat Mar 26, 2016 7:18 pm
- Location: Indiana
Re: Oddest place you've found a knife
Some one was probably running from the police and didn't want to get caught with it so they threw it up on the roof. The knife is a cheapo, I'd just throw it away.
2024 candidate for president
Re: Oddest place you've found a knife
Cool find with interesting story of finding it. I'd just keep it, fun conversation piece.
-
- Posts: 2
- Joined: Sat Jul 02, 2022 3:00 pm
Re: Oddest place you've found a knife
Can I buy replacement parts? like the handle and i think im missing two little brackety looking things as well. Is there blueprints anywhere for these?
Re: Oddest place you've found a knife
You could always keep an eye on ebay. I've seen parts for older, cheaper model OTF's put up for sale. But it looks like you would be replacing almost the entire knife. Don't get your hopes up.Battleborn27 wrote: ↑Fri Jul 08, 2022 6:18 am Can I buy replacement parts? like the handle and i think im missing two little brackety looking things as well. Is there blueprints anywhere for these?
And after being exposed to the elements for so long, I would expect the spring to break fairly quickly if it were ever put back into service.
The fact is, those knives were never high quality knives to begin with. Just inexpensive toys with a limited life span.
You found the remains of a cheap, junk knife. It's entirely possible that it was discarded by someone after it stopped functioning properly. I think it's destined to remain what it is.
Avatar- Ti-Lite Auto Conversion. Video- https://www.youtube.com/watch?v=q79nia-_DzU
My youtube knife channel- https://www.youtube.com/channel/UCjSYCK ... 3s5HNcsL5A
Stiletto switchblade parts for sale- blades, bolsters, sears, rockers/buttons
My youtube knife channel- https://www.youtube.com/channel/UCjSYCK ... 3s5HNcsL5A
Stiletto switchblade parts for sale- blades, bolsters, sears, rockers/buttons
Re: Oddest place you've found a knife
My friend Adam Archer has some spare parts for these NATO OTFs. Perhaps he could hook you up. He’s “thenextarcher” on YouTube and Instagram.Battleborn27 wrote: ↑Fri Jul 08, 2022 6:18 am Can I buy replacement parts? like the handle and i think im missing two little brackety looking things as well. Is there blueprints anywhere for these?
-
- Posts: 2
- Joined: Mon Aug 08, 2022 6:26 pm
Re: Oddest place you've found a knife
Metal detecting I found an old ww2 ammo box with a few silver coins and 3 knives one of which was an old Latama picklock.....all the knives were pretty much shit, but it was a cool find
-
- Posts: 4048
- Joined: Sat Mar 26, 2016 7:18 pm
- Location: Indiana
Re: Oddest place you've found a knife
Go to grindworx and get a lightning otf. Run ya around $30 and probably last you awhile. The knife you found is pretty cheaply made anyway. You ain't got no prize there!Battleborn27 wrote: ↑Sun Jul 03, 2022 3:17 am Working outside most my life you run into some interesting and just out right weird things.
Last week I had the task of removing these big metal panels off an awning in the side of a warehouse. I was about 25' to 30' up. This is in Nevada btw, where the wind blows more sand around than an intern at a DNC convention.
There's about 3 or 4 inches of sand and as I'm moving along the edge I see this metal something sticking halfway up. Being the eyes always on the ground looking for a cool rock guy and my curiosity piqued I pulled it out to reveal a metal handle with some mechanisms inside.
As I turned it over i saw the blade and immediately thought I had found a switchblade. As I looked at it more I saw that there was no side opening but just a gap on the top of the handle. Then I realized HOLY SH**$ I just found a spy knife! Because up until 2 days ago I didn't know the official OTF name. So then I started wondering where this knife came from and why was it 30 feet up on a 10 by 20 awning, buried under sand and grit like it has been there for years... So.. I took the murder weapon home, cleaned it up real nice, put a fresh edge on the blade and started the researching. Which led me here. Oh and one last thing, the body of the handle was whole until I tapped it to remove some stuck dirt haha. It broke exactly at the same point on both sides! I thought you all might enjoy that true story that happens just last Wednesday in Sparks Nevada.
P.s. and as far as I can tell it's a super automatic? And missing at least 2 of those tension brackets. I would love to restore her! I definitely have the brain the tools and the want! Let me know what I should do! Thanks guys and gals.
2024 candidate for president
Re: Oddest place you've found a knife
I once found a Japan lockblade (saguaro cactus ears, or pagoda ears)
outside a police station side door where prisoners were admitted.
It was kicked off into a gravel pile, which i uncovered setting up a small ladder.
I was painting signs on the walls. . . buzz to enter, stand back 10 feet. . .Restroom. . . .
The broken NATO shown above is not particularly old,
Identified by looking at it's long oval crossguards (ears) that sort of angle inwards.
There are no pins in the guards.
All of the older NATOs had visible pins . . and are considered more rare and more collectible.
There are a few NATO mechanism knives that have all ABS plastic and polystyrene plastic bodies.
If you found the proper plastic, you could carve a new plastic body.
and maybe build a cool looking letter opener. . .
but don't try to stab open cans of beans.
Shown is an all plastic modern Super-Automatic.
outside a police station side door where prisoners were admitted.
It was kicked off into a gravel pile, which i uncovered setting up a small ladder.
I was painting signs on the walls. . . buzz to enter, stand back 10 feet. . .Restroom. . . .
The broken NATO shown above is not particularly old,
Identified by looking at it's long oval crossguards (ears) that sort of angle inwards.
There are no pins in the guards.
All of the older NATOs had visible pins . . and are considered more rare and more collectible.
There are a few NATO mechanism knives that have all ABS plastic and polystyrene plastic bodies.
If you found the proper plastic, you could carve a new plastic body.
and maybe build a cool looking letter opener. . .
but don't try to stab open cans of beans.
Shown is an all plastic modern Super-Automatic.
- Attachments
-
- All-Plastic_SuperAutomatic_OTF-901.jpg (104.21 KiB) Viewed 1424 times
Re: Oddest place you've found a knife
Interesting all plastic one !