Hi all,
I bought this poor example just because. It doesn't have much going for it with the issues it has, but man if it could tell us the stories of its life!!
I would like if anyone can tell what it is and or approximate age. I was told by a third party (not the seller) That it is a Latama wasp body from the 1940's/50's. With the tang stamp ground off I do not know of any other way to help ID it. 10 3/4" long, The back spring is 4mm thick, D stamped, ears filled, brass lined, carbon blade, picklock.
It also needs a kick spring, anyone know where I could get one for this old fella? Its probably not a restore candidate unless I can find a nice blade, but I would at least like to have it in working order and leave it like it is.
Thanks for any and all help!
Robb
Need help with Italian Stiletto ID
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Need help with Italian Stiletto ID
- Attachments
-
- IMG_1834.jpg (92.04 KiB) Viewed 1076 times
-
- IMG_1833.jpg (87.37 KiB) Viewed 1076 times
-
- IMG_1832.jpg (90.47 KiB) Viewed 1076 times
-
- IMG_1831.jpg (99.63 KiB) Viewed 1076 times
-
- IMG_1830.jpg (101.17 KiB) Viewed 1076 times
-
- IMG_1829.jpg (92.02 KiB) Viewed 1076 times
-
- IMG_1828.jpg (91.67 KiB) Viewed 1076 times
Re: Need help with Italian Stiletto ID
I have no idea what it is (or was). As far as a new spring, I'm sure there are a few members here who could make one.
At first look I thought to myself that the condition of the blade was someone's horrible attempt at a "restoration". Like maybe the carbon steel blade was badly rusted/pitted and so they put it to a grinder. Otherwise I can't imagine why a person would feel the need to grind every surface.
But then I wondered if maybe the blade is crudely homemade. Perhaps a replacement for a broken blade.
At first look I thought to myself that the condition of the blade was someone's horrible attempt at a "restoration". Like maybe the carbon steel blade was badly rusted/pitted and so they put it to a grinder. Otherwise I can't imagine why a person would feel the need to grind every surface.
But then I wondered if maybe the blade is crudely homemade. Perhaps a replacement for a broken blade.
Avatar- Ti-Lite Auto Conversion. Video- https://www.youtube.com/watch?v=q79nia-_DzU
My youtube knife channel- https://www.youtube.com/channel/UCjSYCK ... 3s5HNcsL5A
Stiletto switchblade parts for sale- blades, bolsters, sears, rockers/buttons
My youtube knife channel- https://www.youtube.com/channel/UCjSYCK ... 3s5HNcsL5A
Stiletto switchblade parts for sale- blades, bolsters, sears, rockers/buttons
- Bill DeShivs
- Yes.
- Posts: 7362
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Need help with Italian Stiletto ID
The blade is original, and it's pretty much ruined.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
Re: Need help with Italian Stiletto ID
Bill, any idea on manufacturer or timeline of manufacture? I wondered about the picklock tab being somewhat unique.
I know it is a ruined blade, but for $40 I couldn't refuse even knowing it would not be a candidate for a restore.
I will make a spring and keep it as is, just knowing any of its history would be beneficial to me.
Thanks
Robb
- Bill DeShivs
- Yes.
- Posts: 7362
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Need help with Italian Stiletto ID
All I can tell you is that it's a 1950s knife. It's not a "wasp body."\Manufacturer could be any of a hundred or so makers during that time frame.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.