In a previous message I’d mentioned Due Buoi knives .
What do you all believe to be the best quality traditional Italian switchblade would be, picklock/swivel/ring pull, whatever..
Best quality traditional Italian switchblade?
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
-
- Posts: 52
- Joined: Sun Aug 26, 2018 4:41 am
Re: Best quality traditional Italian switchblade?
Picklock has less to go wrong. But I think it comes down to personal preference.
Re: Best quality traditional Italian switchblade?
I have mostly Frank Beltrame knives that I think are pretty good. I can't afford higher end knives.
-
- Posts: 52
- Joined: Sun Aug 26, 2018 4:41 am
Re: Best quality traditional Italian switchblade?
Maybe we can get this thread going.
My experience is basically with Beltrame and now a Renzo Pascotto.
I’ve got my eyes set on a Walt’s Latima next!
Obviously Picklock Pat are possibly the benchmark of the finest?
I’m looking for tight fitting scales, liners, etc tight lock up, tight buttons and beautiful... what makers should I be lookig for?
My experience is basically with Beltrame and now a Renzo Pascotto.
I’ve got my eyes set on a Walt’s Latima next!
Obviously Picklock Pat are possibly the benchmark of the finest?
I’m looking for tight fitting scales, liners, etc tight lock up, tight buttons and beautiful... what makers should I be lookig for?
Re: Best quality traditional Italian switchblade?
I am fairly new to switchblades and have purchased 8 Italian stiletto 11" bayonet blade knives online in the last 6 months.
It appears to me that the Italian knives are handmade knives (not mass produced). I examine each of my knives quite closely and find that each knife is going to vary from another. Each is unique in fit and assembly, but not greatly different. My purchases have been only picklocks and swivel bolsters (A.G.A. Campolin and the Beltrames).
I have one 5cm thick spring, one 4cm, and six 3cm. Each thickness of spring has it advantages to me.
A forum member rehandled one knife for me and also added a D-stamp liner. The liner is a wonderful feature of the stiletto.
With new knife purchases, I feel that you get what you get. A perfect knife will be produced by each maker every once in a while (I suppose), but the average switchblade that they make is mighty fine workmanship.
But, remember, I am a novice.
It appears to me that the Italian knives are handmade knives (not mass produced). I examine each of my knives quite closely and find that each knife is going to vary from another. Each is unique in fit and assembly, but not greatly different. My purchases have been only picklocks and swivel bolsters (A.G.A. Campolin and the Beltrames).
I have one 5cm thick spring, one 4cm, and six 3cm. Each thickness of spring has it advantages to me.
A forum member rehandled one knife for me and also added a D-stamp liner. The liner is a wonderful feature of the stiletto.
With new knife purchases, I feel that you get what you get. A perfect knife will be produced by each maker every once in a while (I suppose), but the average switchblade that they make is mighty fine workmanship.
But, remember, I am a novice.
Regards,
arlen
arlen
Re: Best quality traditional Italian switchblade?
If we're talking about the best quality current production Italians, the general consensus points to the AGA Campolin 25cm picklocks with 5mm blades and springs made by Renzo Pascotto. I've never even heard of a dud coming from this lineup, so they're a pretty safe purchase, sight unseen. The only issue I've had with these is the occasional under-extended banana curve. The AGA/Renzo P Frosolones are also right up there quality wise.
The Latama/Walt's Classic swivel bolsters made by Frank Beltrame, also with 5mm blades and springs, are also very high quality knives, but I've encountered a few with less than ideal quality control from the last few runs, so it's best to assess those on an individual basis. Both these and the AGAs above will set you back ~$250 to $300.
The Latama/Walt's Classic swivel bolsters made by Frank Beltrame, also with 5mm blades and springs, are also very high quality knives, but I've encountered a few with less than ideal quality control from the last few runs, so it's best to assess those on an individual basis. Both these and the AGAs above will set you back ~$250 to $300.
Re: Best quality traditional Italian switchblade?
Which Renzo Pascotto piece did you get SwitchGear? Are you looking into modern or vintage Latama's? There's some really great modern production and great vintage production from many makers. You could pay a little, you could pay alot. What seems near perfect to us (you), may not seem so perfect to others. "Best quality" is really a tough call.SwitchGear wrote:Maybe we can get this thread going.
My experience is basically with Beltrame and now a Renzo Pascotto.
I’ve got my eyes set on a Walt’s Latima next!
"By accepting you as you are, I do not necessarily abandon all hope of your improving"- My Wife (1963-Present)
-
- Posts: 52
- Joined: Sun Aug 26, 2018 4:41 am
Re: Best quality traditional Italian switchblade?
JulesVane
I recently traded for a 11” FROSOLONE.
Brazilian and Brass it’s pretty!
I recently traded for a 11” FROSOLONE.
Brazilian and Brass it’s pretty!
-
- Posts: 761
- Joined: Tue Sep 18, 2018 3:19 am
- Location: Portland, OR
Re: Best quality traditional Italian switchblade?
Can we see it ?