Newbie Needs Help...
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Newbie Needs Help...
I am new to autos, own a couple of them and was wondering how they should be stored. Should they be kept open or closed. I read somewhere that keeping them stored for long periods closed would weaken the spring. Is this true? Thanks, Tom.
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
I don't think it makes enough difference to worry about, however the vast majority of people prefer to store them open [or say they do].
The "emergency brake" on the original Otis Elevator [lift for any Brits] was
under constant tension for its entire service life with one exception.
If the cable broke the tension was released. As far as I know these always worked when there was a cable failure. There are probably other constant tension springs all around you that your saftey or at least your comfort depends on. Every time a car engine is off a large percentage of the valve springs are under compression, how often is this a problem?
Still it "feels right" to store them open and it certainly does no harm.
If you check the "help" section at AB/SKM their answer is "it doesn't matter. So do whichever you like. I think most people would say it was a bad spring if they stored it open and it failed, if they stored it closed and it failed they would say "should have stored it open". That's human nature.
I have had three spring failures out of hundreds of knifes, two of those failed WHILE closing [not while they were closed but in the act of closing].
The other failed on opening [pushed the button the blade opened and the spring departed]. Do whatever you're comfortable with, the statistics on those three failures prove nothing.
The "emergency brake" on the original Otis Elevator [lift for any Brits] was
under constant tension for its entire service life with one exception.
If the cable broke the tension was released. As far as I know these always worked when there was a cable failure. There are probably other constant tension springs all around you that your saftey or at least your comfort depends on. Every time a car engine is off a large percentage of the valve springs are under compression, how often is this a problem?
Still it "feels right" to store them open and it certainly does no harm.
If you check the "help" section at AB/SKM their answer is "it doesn't matter. So do whichever you like. I think most people would say it was a bad spring if they stored it open and it failed, if they stored it closed and it failed they would say "should have stored it open". That's human nature.
I have had three spring failures out of hundreds of knifes, two of those failed WHILE closing [not while they were closed but in the act of closing].
The other failed on opening [pushed the button the blade opened and the spring departed]. Do whatever you're comfortable with, the statistics on those three failures prove nothing.
Mr. tommy_boy,
The debate goes on regarding this question. I've always felt that it was best to store autos open. Why? It just seems to me that by doing this your spring is always as new no matter how many years go by. Right or wrong..I don't know. I think the thing that kills a spring faster than anything else is the amount of work (opening and closing) it has to do. My couple of failures happened as I closed the blades. This is over 16 or 17 years and dozens of different switchblades. On the flip side of the coin, I aquired a 50's era imperial switch (cheapie) in 1988. It had been stored closed for probably 30 years- it was gunked shut. I cleaned it up real good and now that blade works as good as new. This blade is also stored closed (it's the only one I keep closed) and continues to work fine. I think the whole thing depends on the knife and what you think is best.
The debate goes on regarding this question. I've always felt that it was best to store autos open. Why? It just seems to me that by doing this your spring is always as new no matter how many years go by. Right or wrong..I don't know. I think the thing that kills a spring faster than anything else is the amount of work (opening and closing) it has to do. My couple of failures happened as I closed the blades. This is over 16 or 17 years and dozens of different switchblades. On the flip side of the coin, I aquired a 50's era imperial switch (cheapie) in 1988. It had been stored closed for probably 30 years- it was gunked shut. I cleaned it up real good and now that blade works as good as new. This blade is also stored closed (it's the only one I keep closed) and continues to work fine. I think the whole thing depends on the knife and what you think is best.