TalkBlade.Info Knife Forums

thank you very much. I try to improve my completion skill

Cardo no Kami with vitamin, Niolox (3mm thick, hardening to 1040°c, keep to 20mn - tempering x2 to 200°c during 30mm) Orange G10 handle, stainless screw, 11cm closed to the tail, high to 3.6cm, thick to 9mm and 11 mm to the screw, 17.5 cm long , 7.6 cm sharp. http://dremeltingpotes.free.fr/Photos/Pl...

john wrote:My wife would say they don't match and why would I need six more knives exactly the same

Some knives table, niolox 2mm (1040°c , aluminium plate hardened, tempering 2*30mn to 200°c) G10 handle, 9 cm sharp, 19-20 cm long. They was for my wife and me, but my wife don't like them. (they are 2mm thinner than the one i did for her last birthday.... And she is disappointed because they aren't...

Thank you :). There is a difference between drill and ream when i do folder :). As i used pivot tube with 0.05mm of size variation, that i better to have a really perfectly round hole :). Before i simply drilled to the size i wanted, but my hole wasn't really round and that could induce a blade play...

I did for the annual build off from another forum a special balisong.

That is the wip in pdf file

http://dremeltingpotes.free.fr/tutorial ... ingeng.pdf

Thank you

Thank you very much guys

A small balisong for a friend of mine. His website is Kiridashi and Tool. The only option i had to make a bali for him was a kiridashi balisong :D Kiridashi 115w8 differential hardening, (810°c 5mn keep to the température, oil bath); tempering 2*30 mn to 200°c The hardened 100c6 tang pin broqued the...

Hi Thank you :). I explain my mystake even if people don't see them :D. That is my way to avoid to some people to make the same. I'm always in the "sharing of knowledge " research :D Auto wasn't in my mind in the last 7 year. Because i wasn't able to make functionnal spring. Now, i'm more or less to...

11 cm long, 1 cm thick.19,5 cm long open, 7,5 cm sharp 3mm thick blade 115w8, oil hardened, 200°c tempered (2*30mn). Ta6V4 handle, O1 spring tempered to 340°c. Black G10 scale. Spyderhole licenced by spyderco. It's a slip joint on ball bearing. The blade is not perfectly centered closed because i'm ...

thank you

I did for the JD halloween Build Off a fixed blade a bit strange :D The Devil Tongue 30 cm long : 16 cm sharp : 7 cm for the secondary edge 3 mm Niolox blade , under aluminium plate hardening to 1040°c (kept 25mn) , 200°c during 30mn x2 tempering. Half full tang building and G10 Orange/black handle ...

Thank you