TalkBlade.Info Knife Forums

Alpha-Gal Syndrome Up 5,566% in Ten Years

https://www.zerohedge.com/news/2026-05-20/alpha-gal-syndrome-5566-ten-years-when-cia-carpet-bombed-cuba-weaponized-tick

Guess which compound eradicates Alpha-Gal from the human body.

(As well as Borrelia/Lyme btw)

Doesn't matter, chlorine dioxide kills all of them, from Covid to Hanta, and from Anthrax to Ebola to Rabiës.
Everyone should have this stuff in their medical cabinet.

In neighboring country Germany the demand for the ready-made solution is so large that is is almost sold out everywhere.
It removes ...

New article from Mark Crispin Miller:

https://markcrispinmiller.substack.com/ ... hose-folks

Also read the responses,

It was actually a project to find out if it was possible to change a saber grind blade into a hollow grind blade, and do it completely cold on the Tormek.
I had never tried this before, and although not perfect in execution it did work.
A diamond wheel would most likely have done a better & faster ...

Website of a US based MD who writes a lot about DMSO and it's health effects:

https://www.midwesterndoctor.com/p/the- ... and-safety

Documentary "Follow the Silenced":

https://www.youtube.com/watch?v=ki9VsbQqjic

Your best bet would probably be to become a member of this UK-based knife forum:

https://www.edgematters.uk/

Just like here they have lots of very friendly & helpful members, and also quite a few very talented knife makers.
Maybe even in your area.

Years ago i modified this Spyderco Endura ZDP-189 from a saber/flat ground to a saber/hollow ground knife with the help of my trusted Tormek T7 fitted with an SB-250 Black Silicon stone & a modified knife clamp.
Previously the knife looked like this (with an already Tormek reprofiled edge angle of ...

Strider DB in 3V steel.
This is a limited edition of the DB model in CPM-3V steel and made from thinner stock than the usual S30V versions.
Originally it looked like this:

https://i.postimg.cc/cCCf57rn/image-(11).png

https://i.postimg.cc/br51XGt2/image-(12).png

https://i.postimg.cc/wTYKztT5 ...

Cletus is a cook and that's what he does.

The clip showcases the amazing things one can do to a knife edge with a pull-through "sharpener".

https://www.youtube.com/watch?v=UMBD1Hhgdzo

This knife was sold a while ago for 325 Euro to an experienced local hunter who actually uses it as a hunting knife.

Decades ago the man owned exactly the same Boone model but somehow lost it, and he spent many years looking for another in good condition.

He praises both the very useful overall ...

Recovered some pictures from an old harddisk.
Several years ago i got sent these two user Emerson folders from neighboring country Belgium; a Commander model with a Krein regrind and a CQC7 model.
The owner was unable to get them sharp again with only his Sharpmaker, and the request was also to give ...

Imo the Shinobu model would be a good candidate to bring back, of course with a Tri-Ad lock, a more modern steel type, a better synthetic rubber handle (Resiprene-C if possible) or even canvas Micarta grips, and maybe even a pointier tip,

Karma ?

https://dailytelegraph.co.nz/covid-19/p ... y-aged-33/

Sometimes i buy used older knives to restore, but also as practice material to try out certain idea's.

The tanto point on this used & worn 1980's Cold Steel Shinobu folder was made a bit pointier with the help of my Tormek T7, then sharpened & polished on a first generation Wicked Edge.
The ...