Stabilizing Wood
Moderators: Bill DeShivs, The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Stabilizing Wood
Hey guys.....What is the best way to stabilize wood at home. Some of you say to use crazy clue. Is the clue an efective way or just a quick job?
~RAZOR~
Rather be judged by 12 than carried by 6
Rather be judged by 12 than carried by 6
- Bill DeShivs
- Yes.
- Posts: 7368
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
- Vagrant
- Self Appointed Authority
- Posts: 25715
- Joined: Fri May 24, 2002 10:07 am
- Location: Live Free or Die
- Contact:
The "improvised" way is to make a vacuum chamber, coat the knife with crazy glue, put it in the chamber and pull a strong vacuum. Make sure the chaber will hold vacuum for 10 hrs or so. The size of the piece may make repeat applications necessary. I'm sure research will find more complete info [including pressure methods]. A hand held vacuum pump [used for bleeding brakes] is fine.
- johnnycanuck
- Posts: 19
- Joined: Tue May 11, 2004 9:15 pm
PEG
I think the stuff is called PEG (Polyethyline Glycol?) It is used in museums to stablize wood and bark artifacts. Basically, it is a high molecular weight resin that impregnates the wood and then hardens to stabilize it. It does add a bit of weight and a dark waxy finish. Both which can look pretty good with wood scales, I think. Lee Valley Tools in Canada used to carry the stuff, and may still.
JC
JC
- johnnycanuck
- Posts: 19
- Joined: Tue May 11, 2004 9:15 pm
PEG link
It is indeed PEG. Nice to see that my memory is not so bad...
http://www.leevalley.com/wood/page.asp? ... ,190,42942
JC
http://www.leevalley.com/wood/page.asp? ... ,190,42942
JC
What about using marine epoxy? I use it all the time on my rotting house. Recently I had a window sash that was spongy in some places. Mix up the epoxy and brush it on the wood until it doesn’t absorb any more. Once it dries, it’s like new wood. This is the brand I use: http://www.westepoxy.com.