Just Joined
Moderators: arthas, The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Just Joined
Hello everyone . . .I'm just arrived here on this forum.
I'm Jerry Katrencik from south of Pittsburgh Pa. . . . . Born in the 50's.
I'm a retired career Draftsman / Mechanical Designer / Technical Illustrator / Cartoon Artist.
I have U.S.Gov patents on Ammonium DiMolybdate Conversion Furnace and also Sears Craftsman type woodworking tools.
I worked at the Meadows Horse Race Track as a teenager.
I worked at Molycorp Chemical Plant. a "Strategic Metals Production Company" in the 1980's
and was exposed to Toxic low level radio-active Rare Earth Metals in reduction furnaces,
(we made coatings for jet radar nose-cone dishes.) and it affected my health.
I'm mostly bed-ridden with my leg skin deteriorating and bone joint deterioration.
I co-owned an worked at machine shop for 20 years and sold my shares, got out.
I drew for Sheldon Levy of the old 1980's pre-internet Automatic Knives Newsletter a few times.
I worked with All-Clad Metalcrafters (stainless kitchen cutlery / spoons / Ladles, and pots and pans).
I inherited my fathers Barlow Knife collection, and started collecting "One Cent Sale" mini stilettos as a kid.
my first switchblades was a brown swirl Snappy that my Father gave me along with
his Edgemaster Paratroopers knife with a chain and beer bottle opener Fob end.
I like Manual Picklocks, and have many 9 inch G.C.Co lockbacks that I mangled into gravity flick knives.
I have a special liking for the Movie Knife from "Eye of the Needle" , and once built a few at the shop.
Recently I've done some drawings for Walt Halucha of Latama LLC.
(Don't ask me to post his stuff, I'm a bonded agent patent illustrator, it's all proprietary intellectual property)
I like "the Red Baron", My 1966 GTO, Balsa Airplanes, M1 Carbines, Cowboy Six shooters,
I have a pretty complete Mad Magazine collection except for 3 or 4 of the early years.
I have two brothers that are artists, one older, one younger, both were/ are art teachers.
a nurse sister, a mother and mother-in-law. and many other family members.
We all live together or within walking distance.
I guess I'm a Mangler. . . not a knife maker. . . . .I've cobbled up repairs. . .
I was pretty good at cosmetic repairs on old horn. But my old hands can not grab tools anymore.
I can still hold an Inkpen . . .but I fall asleep in the middle of drawing and drool all over my pages.
I'm new to this forum's setup . . I need to figure out the buttons.
Here's my cartoon self image drawn with my own hand.
Here's my real face with and without a beard.
I'm Jerry Katrencik from south of Pittsburgh Pa. . . . . Born in the 50's.
I'm a retired career Draftsman / Mechanical Designer / Technical Illustrator / Cartoon Artist.
I have U.S.Gov patents on Ammonium DiMolybdate Conversion Furnace and also Sears Craftsman type woodworking tools.
I worked at the Meadows Horse Race Track as a teenager.
I worked at Molycorp Chemical Plant. a "Strategic Metals Production Company" in the 1980's
and was exposed to Toxic low level radio-active Rare Earth Metals in reduction furnaces,
(we made coatings for jet radar nose-cone dishes.) and it affected my health.
I'm mostly bed-ridden with my leg skin deteriorating and bone joint deterioration.
I co-owned an worked at machine shop for 20 years and sold my shares, got out.
I drew for Sheldon Levy of the old 1980's pre-internet Automatic Knives Newsletter a few times.
I worked with All-Clad Metalcrafters (stainless kitchen cutlery / spoons / Ladles, and pots and pans).
I inherited my fathers Barlow Knife collection, and started collecting "One Cent Sale" mini stilettos as a kid.
my first switchblades was a brown swirl Snappy that my Father gave me along with
his Edgemaster Paratroopers knife with a chain and beer bottle opener Fob end.
I like Manual Picklocks, and have many 9 inch G.C.Co lockbacks that I mangled into gravity flick knives.
I have a special liking for the Movie Knife from "Eye of the Needle" , and once built a few at the shop.
Recently I've done some drawings for Walt Halucha of Latama LLC.
(Don't ask me to post his stuff, I'm a bonded agent patent illustrator, it's all proprietary intellectual property)
I like "the Red Baron", My 1966 GTO, Balsa Airplanes, M1 Carbines, Cowboy Six shooters,
I have a pretty complete Mad Magazine collection except for 3 or 4 of the early years.
I have two brothers that are artists, one older, one younger, both were/ are art teachers.
a nurse sister, a mother and mother-in-law. and many other family members.
We all live together or within walking distance.
I guess I'm a Mangler. . . not a knife maker. . . . .I've cobbled up repairs. . .
I was pretty good at cosmetic repairs on old horn. But my old hands can not grab tools anymore.
I can still hold an Inkpen . . .but I fall asleep in the middle of drawing and drool all over my pages.
I'm new to this forum's setup . . I need to figure out the buttons.
Here's my cartoon self image drawn with my own hand.
Here's my real face with and without a beard.
- Attachments
-
- Jerry-thinking-000.jpg (101.74 KiB) Viewed 8976 times
-
- Jerry-K-Talkblade-02.jpg (28.52 KiB) Viewed 8980 times
Last edited by jerryk25 on Tue Aug 10, 2021 6:13 am, edited 1 time in total.
Re: Just Joined
Welcome Jerry- good to see you here.
Jim
Jim
- whippersnapper
- Posts: 8426
- Joined: Sat Oct 16, 2004 12:39 pm
- Location: Michigan
Re: Just Joined
Howdy Jerry!
- Bill DeShivs
- Yes.
- Posts: 7378
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Just Joined
Glad you made it.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
-
- Posts: 4043
- Joined: Sat Mar 26, 2016 7:18 pm
- Location: Indiana
Re: Just Joined
Welcome aboard, used to really enjoy your posts on sharperdeal forum.
2024 candidate for president
- natcherly
- Connoisseur dei Coltelli
- Posts: 6340
- Joined: Mon Mar 29, 2004 3:59 pm
- Location: Baghdad by the Bay
Re: Just Joined
Hi Jerry! Really enjoy your informative and often hilarious posts. Welcome!!!
Re: Just Joined
Hello Jerry!
"By accepting you as you are, I do not necessarily abandon all hope of your improving"- My Wife (1963-Present)
Re: Just Joined
JERRY !!! GLAD YA MADE IT OVER. LOOKIN FORWARD TO YOUR INFORMATIVE POSTS.
TRYKER
A man who brags about how smart he is, wouldn't if he was.
"Rose-colored glassses are never made in bifocals. Nobody wants to read the small print in dreams"
A man who brags about how smart he is, wouldn't if he was.
"Rose-colored glassses are never made in bifocals. Nobody wants to read the small print in dreams"
- rock-n-roll$$$$$$
- Posts: 986
- Joined: Tue Nov 29, 2016 9:04 pm
Re: Just Joined
good to have you here Jerry.
Re: Just Joined
Glad you joined here too Jerry and on my birthday ! Great present !
-
- Posts: 2218
- Joined: Sat May 03, 2003 11:10 pm
- Location: Forest Grove, OR
- arthas
- Cutlery Town Warrior
- Posts: 1580
- Joined: Thu May 23, 2002 6:11 pm
- Location: The downtown of the cutlery town
- Contact:
Re: Just Joined
Welcome, Jerry!