Were 1950's switchblades better than the ones sold nowadays?

This is a forum for discussion on automatic an switchblade knives.

Moderator: The Motley Crew

Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
User avatar
sprite
Posts: 75
Joined: Wed Jan 06, 2010 8:48 pm

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by sprite »

First off all, NONE of you have the right to call me a troll when you're trolls yourself. A troll is not only someone who causes trouble or seeks attention, but also a person who responds and is not on topic with what the OP had to say. You all were bashing me instead of answering my question and you have the nerve to call ME the troll.

I don't have ANYTHING and I mean ANYTHING bad to say about someone who doesn't act rude to me but I am not going to sit here and have people tell me to look up answers when I'm the damn one asking the question. It doesn't work that way. If you have the answer, answer it. But if you don't then FUCK OFF!

And to the one person who did answer my questions thanks! :mrgreen:
User avatar
JerrBear
MB Suckin' Bottom Feeder
Posts: 8363
Joined: Thu May 23, 2002 7:41 pm
Location: Fresno-by-the-Sea

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by JerrBear »

sprite wrote:If you have the answer, answer it. But if you don't then FUCK OFF!
There are some people who are so stUPid they're not even aware they're stUPid. Alas, you appear to be one of them...
JerrBear
Have you hugged a Bear today?
User avatar
Vagrant
Self Appointed Authority
Posts: 25715
Joined: Fri May 24, 2002 10:07 am
Location: Live Free or Die
Contact:

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by Vagrant »

Some of us have learned [the hard way] - if you don't fit in, you don't belong :oops:
Right or wrong doesn't matter, you "get with the program or get gone" :idea:
I have been kicked off forums and made Moderator on others, I have found where I belong :idea: [and don't miss the others]
It IS time for you to decide if YOU want to participate or ALWAYS be considered a troll :!:
Your demanding attitude and inability to change, make me doubt that you CAN "fit in" :idea:
User avatar
Bill DeShivs
Yes.
Posts: 7392
Joined: Sat May 25, 2002 2:50 pm
Location: In de lan o' cotton
Contact:

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by Bill DeShivs »

I'll bet he has been thrown of better forums than this! :wink:
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
User avatar
hogwild
Posts: 1202
Joined: Thu Jan 27, 2005 12:24 am
Location: Proudly chasing the dollar to "share" with parasites

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by hogwild »

I think the child just McFu*&ed himself pretty good here.
The worst evils which mankind has ever had to endure were inflicted by bad governments.
Ludwig von Mises
User avatar
Vagrant
Self Appointed Authority
Posts: 25715
Joined: Fri May 24, 2002 10:07 am
Location: Live Free or Die
Contact:

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by Vagrant »

Bill DeShivs wrote:I'll bet he has been thrown of better forums than this! :wink:
I didn't know there are any better ones :wink:
User avatar
heviarti
Posts: 1249
Joined: Sun May 16, 2010 6:17 pm
Location: Emmett, Idaho

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by heviarti »

So Jerr, lemme ask you something: So what's the deal with your avatar, the fish with the 'duh' look?
I walked a mile in my enemy's shoes.... And then I stole his shoes.
User avatar
JerrBear
MB Suckin' Bottom Feeder
Posts: 8363
Joined: Thu May 23, 2002 7:41 pm
Location: Fresno-by-the-Sea

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by JerrBear »

heviarti wrote:So Jerr, lemme ask you something: So what's the deal with your avatar, the fish with the 'duh' look?
Mr. heviarti,

I am what's known as a "Bottom Feeder" (No computer)... Our illustrious and highly respected MOD, Misser Bongo, was kind enough to provide the 'Dopey Fish' avatar to represent same...


What's with your signature line?
JerrBear
Have you hugged a Bear today?
User avatar
redeye
Posts: 1876
Joined: Sun Feb 24, 2008 3:10 pm
Location: STARKE FL. REDNECK CAPITAL OF THE WORLD

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by redeye »

sprite wrote:First off all, NONE of you have the right to call me a troll when you're trolls yourself. A troll is not only someone who causes trouble or seeks attention, but also a person who responds and is not on topic with what the OP had to say. You all were bashing me instead of answering my question and you have the nerve to call ME the troll.

I don't have ANYTHING and I mean ANYTHING bad to say about someone who doesn't act rude to me but I am not going to sit here and have people tell me to look up answers when I'm the damn one asking the question. It doesn't work that way. If you have the answer, answer it. But if you don't then FUCK OFF!

And to the one person who did answer my questions thanks! :mrgreen:

hey mellow yellow or whatever sugarfilled sweet drink you are today why dont you bring that F-U with ya too if and when you decide to meet me somewhere so we can settle this in a mid-evil kinda way. bring something sharp and pointy for the battle nothing Korean though lol you worthless piece of sub-human crap. oh yeak all you have is korean crap right ? get a life somewhere else.
I am the KING of LATAMA collectors HAHAHAHAHAHAHA {EVIL LAUGH}
User avatar
Jeff
Posts: 1864
Joined: Sun Mar 08, 2009 3:52 am
Location: Ca

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by Jeff »

Lets all remember the mentality we are dealing with................... It's the same thing every time and his posts always end up locked.
Jerrbear you would pass out from laughing so hard if you could view youtube videos for these ones. It is Stellar!


http://www.youtube.com/watch?v=pR4P_P_Uc-0
.
http://www.youtube.com/watch?v=vDKNLS8DfRA
.
http://www.talkblade.info/viewtopic.php?t=14195
.
Leverlock switchblades
User avatar
redeye
Posts: 1876
Joined: Sun Feb 24, 2008 3:10 pm
Location: STARKE FL. REDNECK CAPITAL OF THE WORLD

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by redeye »

man I gotta sign up for that profusion x deal right now
I am the KING of LATAMA collectors HAHAHAHAHAHAHA {EVIL LAUGH}
User avatar
JerrBear
MB Suckin' Bottom Feeder
Posts: 8363
Joined: Thu May 23, 2002 7:41 pm
Location: Fresno-by-the-Sea

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by JerrBear »

Jeff_75 wrote:
Jerrbear you would pass out from laughing so hard if you could view youtube videos for these ones. It is Stellar!
Mr. Jeff_75,

I will forward this thread to my Bestest Buddy and watch it at her house... Thanks!
JerrBear
Have you hugged a Bear today?
User avatar
Jeff
Posts: 1864
Joined: Sun Mar 08, 2009 3:52 am
Location: Ca

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by Jeff »

No prob Jerr,
It's probably funnier if you go directly to the second video right after the 1st video ends. :)
Leverlock switchblades
User avatar
heviarti
Posts: 1249
Joined: Sun May 16, 2010 6:17 pm
Location: Emmett, Idaho

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by heviarti »

Jer-

I was reading the enquirer and there was a picture of this thingie that looked like one of them trolls. You know, with the goofy hair and the bare ass?

Anyway, I read those very words in the enquirer.... and said to myself 'hmm. that's what's wrong with them'

I'll see if I can find a pic of Yok-yok. If you have no machine, how are you posting?
I walked a mile in my enemy's shoes.... And then I stole his shoes.
User avatar
Jeff
Posts: 1864
Joined: Sun Mar 08, 2009 3:52 am
Location: Ca

Re: Were 1950's switchblades better than the ones sold nowadays?

Post by Jeff »

He's using a t.v
Leverlock switchblades
Locked